ELEMENTS OF MECHANICAL ENGINEERING

2014 Scheme

Subject Code: 14EME14/14 EME24

IA Marks: 25

Hours/Week: 04

Exam. Hours: 03

Total Hours: 50

Exam. Marks: 100

Module – 1

Energy Resources : Non-renewable and renewable energy resources, Petroleum based solid, liquid and gaseous fuels, Calorific values of fuels, Combustion and combustion products of fuels, Solar Power : Solar Radiation, Solar constant (definition only), Solar Thermal energy harvesting, ex: liquid flat plate collectors, solar ponds (principle of operation only), Solar photovoltaic principle.Wind Power : principle of operation of a typical windmill. Hydro Power : Principles of electric power generation from hydropowerplants, Nuclear Power : Principles of Nuclear power plants, Bio Fuels : introduction to bio fuels, examples of various biofuels used in engineering applications, Comparison of biofuels with petroleum fuels in terms of calorific value and emission. Steam Formation and Properties : Classification of boilers, Lancashire boiler, Babcock and Wilcox boiler, boiler mountings and accessories (No sketches for mountings and accessories), wet steam, saturated and superheated steam, specific volume, enthalpy and internal energy. (No numerical problems in this module). 10 Hours

Module – 2

Turbines and IC Engines and Pumps Steam turbines :

Classification, Principle of operation of Impulse and reaction turbines, Delaval’s turbine, Parson’s turbine. (No compounding of turbines).

Gas turbines :

Classification, Working principles and Operations of Open cycle and closed cycle gas turbines.

Water turbines :

Classification, Principles and operations of Pelton wheel, Francis turbine and Kaplan turbine

Internal Combustion Engines :

 Classification, I.C. Engines parts, 2 Stroke and 4 stroke Petrol engines, 4 stroke diesel engines.  P-V diagrams of Otto and Diesel cycles.   Problems on indicated power, brake power, indicated thermal efficiency, brake thermal efficiency, mechanical efficiency, and specific fuel consumption, [numericals on IC Engines]. 10 Hours

Module – 3

Machine Tools and Automation Machine Tools Operations :

Turning, facing, knurling, Thread cutting, Taper Turning by swivelling the compound rest, Drilling, Boring, Reaming, Tapping, Counter Sinking, Counter Boring, -Plane milling, End milling, Slot milling. (No sketches of Machine tools, sketches to be used only for explaining operations. Students to be shown the available machine tools in the Machine Shop of the college before explaining the operations)

Robotics and Automation :

Robotics : Introduction, classification based on robots configuration; Polar, cylindrical, Cartesian Coordinate and spherical. Application, Advantages, and disadvantages
Automation : Definition, types –Fixed, Programmable & Flexible automation, NC/ CNC machines: Basic elements with simple block diagrams, advantages and disadvantages.  10 Hours

Module – 4

Engineering materials and joining processes :

 Engineering Materials :
Types and applications of Ferrous & Nonferrous metals and alloys, Composites : Introduction: Definition, Classification and applications (Air craft and Automobiles)
Soldering, Brazing and Welding :
Definitions, classification and method of soldering, Brazing and welding. Differences between soldering, Brazing and Welding. Description of Electric Arc Welding and Oxy-Acetylene Welding. 10 Hours

Module – 5

Refrigeration, Air-Conditioning :

Refrigerants : properties of refrigerants, list of commonly used refrigerants. Refrigeration –
Definitions – Refrigerating effect, Ton of Refrigeration, Ice making capacity, COP, Relative COP, unit of Refrigeration.  Principle and working of vapor compression refrigeration and vapour absorption refrigeration:  Principles and applications of air conditioners, Room air conditioner. 10 Hours

Course Outcomes :

Students shall demonstrate knowledge associated with,
1.  Various Energy sources, Boilers, Prime movers such as turbines and IC engines, refrigeration and air-conditioning systems
2.  Metal removal process using Lathe, drilling, Milling Robotics and Automation.
3.  Fair understanding of application and usage of various engineering materials.

Scheme of examination :

• Two full questions (with a maximum of four sub questions) of twenty marks each to be set from each module. Each question should cover all the contents of the respective module.
• Students have to answer  five full questions choosing one full question from each module

Text Books :

1. V.K.Manglik, “Elements of Mechanical Engineering”, PHI Publications, 2013. (Module-1,2,4,5)
2. Mikell P.Groover, “Automation, Production Systems & CIM”, 3rd Edition, PHI (Module -3)
3. K.R.Gopalkrishna, “A text Book of Elements of Mechanical Engineering”- Subhash Publishers, Bangalore. (Module -1,2,3,4,5)

Reference Books :

1. S.TrymbakaMurthy, “A Text Book of Elements of Mechanical Engineering”, 4th Edition 2006, Universities Press (India) Pvt Ltd, Hyderabad.
2. K.P.Roy, S.K.Hajra Choudhury, Nirjhar Roy, “Elements of Mechanical Engineering”, Media Promoters & Publishers Pvt Ltd,Mumbai,7th Edition,2012
3. Pravin Kumar, “Basic Mechanical Engineering”, 2013 Edition, Pearson.

All the Best ..!!